Many construction sites work all night long. Therefore, lighting in a construction site is a prerequisite for a continuous and uninterrupted project to take place, either in winter or in summer time.
Properly organized coverage (selection and placement of light sources, lighting fixtures), allows you to work without slowing down, even in the dark. Moreover, the relevant standards for construction site lighting and uniform light distribution, are applied to: workplace, aisles and driveways, storage places, sanitary facilities, erected building structures, and dangerous places in the production of excavation. Engineering preparation of the territory is one of the factors that reduce workplace injuries.
Construction site lighting should be uniform and sufficient to carry out one or another of the construction process and to satisfy building regulations, as well as to take into account the fact that often the conditions of the construction site do not allow the placement of lighting equipment in the immediate vicinity, requiring a light flow direction with significant distance.
A possible solution for this problem might be the installation of powerful, resistant-to-vibration LED fixtures on a construction crane. “LedsUniverse” LED lights are an energy-efficient replacement for traditional light sources. The advantages of their use include: optimal illumination ratio of vertical and horizontal surfaces, ease of placement and maintenance of lighting systems, with advanced optical ability.
Lighting construction sites with LedsUniverse’s LED lights, allows you to save money while increasing the brightness of the area by roughly 3 times. All of this under low power consumption and long service life of our fixtures (more than 80000 hours). LedsUniverse’s LED lamps will last for more than 9 years, with minimal to no maintenance.
The advantages of using our floodlights in the construction sector are: optimal ratio of illumination of vertical and horizontal surfaces, along with easy placement and maintenance of lighting systems.
Our flood lights are glare-free, have lower energy and electrical consumption rates, even if using high-power light sources, and have reduced shadowy effect on a construction site and surrounding facilities. In order to minimize the effect of glare, it is recommended that the minimum allowable height of installation, and the direction of the axial luminous intensity are shifted from the center of the working area.
However, the conditions on construction sites often do not allow for installations of lighting equipment in the immediate vicinity, requiring a light flow direction starting at a considerable distance.
To tackle this task special lighting equipment is needed, like projectors, which can guarantee widespread coverage at construction sites, quarries, pits, airfields, and other large open spaces.
Standard floodlight consists of a body within which is installed the lamp and reflector. But our flood lights distinguish themselves and are unparalleled because of our advanced optical and modular approach, which enables the light beam to travel much further and convert more lumen into ground lux.
Our lamp is designed to maximize the lighting effects and brightness according to different functionalities. In short, the main purpose of our LED spotlight is the generation of a strong light beam with long-reaching characteristics. Typically, LED flood lights are used to illuminate an area more intensely, making it contrast with its surrounding space.